Robot Coupe CMP 300 V.V. Spécifications télécharger pdf (Page 6)

Whisk function : speed between 500 and 1800 rpm.

Mixer function : speed between 2300 and 9600 rpm.

It is advisable to start at a low speed when using

the whisk.

With the self-regulating speed system, once you

have selected a speed, it will remain constant, even

if the consistency of your mixture changes.

WORKING POSITION

• BLADE FUNCTION

For greater control, we

recommend that you hold

the power mixer by the

handle and the bottom of

motor unit. Furthermore,

we recommend that you

tilt the power mixer at a

slight angle to prevent

the bell from touching the

bottom of the container.

The power mixer can

equally be rested against

the rim of the container,

but must be tilted, and the

bell must not touch the

bottom of the container.

Always make sure that

the bell is sufficiently

immersed to avoid

splashing and that the

air vents of the motor unit does not come into

contact with any liquid.

For optimum efficiency, two thirds of the foot should

be immersed in the preparation.

• WHISK FUNCTION

You can also hold the

appliance by the handle

with one hand, leaving

the other hand free

to hold the bowl, if

necessary.

While you process the

preparation, we recom-

mend that you move the

whisks around in the

bowl, in order to ensure

that the mixture is com-

pletely homogeneous.

We strongly advise you

to keep the whisks from

touching the sides of the

bowl. For maximum

efficiency, at least one-

fifth of the whisk length

should be immersed. We

also strongly advise you

to start the processing at

a low speed.

ASSEMBLING /

DISMANTLING

• BLADE FUNCTION

Attaching the tube to the motor unit.

(only for CMP Combi)

- Check that the appliance is not plugged in.

- Align the flat side of the conical part of the

tube with catch into the aluminium casing.

- Insert the whole of the conical part of the tube

into the aluminium casing.

- Turn the tube in the direction of the arrow (see

figure) until it is locked into place moderately tightly.

Removing the tube from the motor unit

(only for CMP Combi)

- Check that the appliance is unplugged.

- Turn the tube in the opposite direction to that used

when attaching it.

- When it will go no further, remove the tube of the

aluminium casing.

Attaching the bell from the tube

- Check that the machine is not plugged in.

- Align the flat side of the conical part of the

tube with catch he inside of the bell.

TURN TO

ATTACH BELL

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Commentaires sur ces manuels

Pas de commentaire

Robot Coupe CMP 300 V.V. Spécifications Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs Robot Coupe CMP 300 V.V.